D-Link xStack DES-3200 Series Reference Manual page 343

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
show mld_snooping group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display MLD snooping groups:
DES-3200-28:4#show mld_snooping group
Command: show mld_snooping group
Source/Group
VLAN Name/VID
Port Member
Mode
Source/Group
VLAN Name/VID
Port Member
Mode
Source/Group
VLAN Name/VID
Port Member
Mode
DES-3200-28:4#
show mld_snooping mrouter_ports
Purpose
Syntax
Description
Parameters
Used to display the current MLD snooping group configuration on the
Switch.
show mld_snooping group {[vlan <vlan_name 32> | vlanid <vidlist>]}
This command is used to display the current MLD snooping group
configuration on the Switch.
<vlan_name 32>  The name of the VLAN to view MLD snooping
group configuration information.
<vidlist> - The VIDs to view MLD snooping group configuration
information.
If no parameters are specified, the system will display all current MLD
group snooping configurations of the Switch.
None.
: 2000::100:10:10:5/FF0E::100:0:0:20
: default/1
: 1-2
: INCLUDE
: 2000::100:10:10:5/FF0E::100:0:0:20
: default/1
: 3
: EXCLUDE
: NULL/FF0E::100:0:0:21
: default/1
: 4-5
: EXCLUDE
Used to display the currently configured router ports on the Switch.
show mld_snooping mrouter_ports {vlan <vlan_name 32> | vlanid
<vidlist>} {static | dynamic | forbidden}
This command is used to display the currently configured router ports
on the Switch.
<vlan_name 32>  The name of the VLAN on which the router port
resides to view information for.
338