D-Link xStack DES-3200 Series Reference Manual page 205

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
Example usage:
To configure the RADIUS settings:
DES-3200-28:4#config radius 1 10.48.74.121 key dlink default
Command: config radius 1 10.48.74.121 key dlink default
Success.
DES-3200-28:4#
config radius parameter
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the timeout option for RADIUS servers:
DES-3200-28:4# config radius parameter timeout 3
Command: config radius parameter timeout 3
Success.
DES-3200-28:4#
show radius
Purpose
Syntax
Description
Parameters
Restrictions
Used to configure parameters for RADIUS servers.
config radius parameter {timeout <int 1-255> | retransmit <int 1-
255>} (1)
This command is used to configure parameters for RADIUS servers.
timeout <int 1-255>  The time in second for waiting server reply.
The default value is 5 seconds.
retransmit <int 1-255>  The count for re-transmit. The default value
is 2.
Only Administrator-level users can issue this command.
Used to display the current RADIUS configurations on the Switch.
show radius
This command is used to display the current RADIUS configurations
on the Switch.
None.
None.
200