Mac-Based Vlan Commands - D-Link xStack DES-3200 Series Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
The MAC-based VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table:
Command
create mac_based_vlan
delete mac_based_vlan
show mac_based_vlan
Each command is listed, in detail, in the following sections.
MAC-
Parameters
mac_address <macaddr> vlan <vlan_name 32>
{mac_address <macaddr> vlan <vlan_name 32>}
{mac <macaddr> | vlan <vlan_name 32>}
408
VLAN C
BASED
49
OMMANDS