D-Link xStack DES-3200 Series Reference Manual page 470

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
Example usage:
To enable all MPs to reply to LTM:
DES-3200-28F:4# config cfm mp_ltr_all enable
Command: config cfm mp_ltr_all enable
Success.
DES-3200-28F:4#
show cfm mp_ltr_all
Purpose This command is used to show the current configuration of the "all MPs reply LTRs" function.
Syntax show cfm mp_ltr_all
Description This command is used to show the current configuration of the "all MPs reply LTRs" function.
Parameters None.
Restrictions None.
Example usage
To view MP reply LTR function status:
DES-3200-28F:4# show cfm mp_ltr_all
Command: show cfm mp_ltr_all
All MPs reply LTRs: Enabled
DES-3200-28F:4#
show cfm remote_mep
This command is used to display remote MEPs.
Purpose
Syntax show cfm remote_mep [ md <string 22> ma <string 22> mepid <int 1-8191> | mepname <string
32> ] remote_mepid <int 1-8191>
Description This command displays remote MEP information.
ma <string 22> - The name of the maintenance association (MA) of the remote MEP to view.
Parameters
md <string 22> - The name of the maintenance domain (MD) of the remote MEP to view.
mepid <int 1-8191> - The MEP identifier of the local MEP
mepname <string 32>
remote_mepid <int 1-8191> - The name of the remote MEP
None.
Restrictions
Example usage:
The name of the local MEP.
465