D-Link xStack DES-3200 Series Reference Manual page 70

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
config snmp system_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch name for "DES-3200-28 Switch":
DES-3200-28:4#config snmp system_name DES-3200-28 Switch
Command: config snmp system_name DES-3200-28 Switch
Success.
DES-3200-28:4#
enable rmon
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable RMON:
DES-3200-28:4#enable rmon
Command: enable rmon
Success.
DES-3200-28:4#
Used to configure the name for the Switch.
config snmp system_name {<sw_name>}
This command is used to configure the name of the Switch.
<sw_name>  A maximum of 128 characters is allowed. A NULL
string is accepted if no name is desired.
Only Administrator-level users can issue this command.
Used to enable RMON on the Switch.
enable rmon
This command is used, in conjunction with the disable rmon
command below, to enable and disable remote monitoring (RMON)
on the Switch.
None.
Only Administrator-level users can issue this command.
65