Panasonic KX-NCP500 Programming Manual page 253

Default
1.5 s
Value Range
1.5 s, 2.5 s, 3.5 s, 4.5 s
Maintenance Console Location
3.30 [1-1] Slot—Port Property - LCO Port
Programming Manual References
None
Feature Manual References
13.1.4 Pause Insertion
8.1.5 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
16.1.6 Special Carrier Access Code
Flash Time
Specifies the length of a flash signal.
Default
608 ms
Value Range
None, 16 ´ n (n=1–255) ms
Maintenance Console Location
3.30 [1-1] Slot—Port Property - LCO Port
Programming Manual References
None
Feature Manual References
5.1.1 EFA (External Feature Access)
Disconnect Time
Specifies the length of time after a CO line is disconnected, during which the PBX cannot seize the line.
Default
1.5 s
Value Range
0.5 s, 1.5 s, 2.0 s, 4.0 s, 12.0 s
Document Version 2011-10
3.30 [1-1] Slot—Port Property - LCO Port
PC Programming Manual 253