Panasonic KX-NCP500 Programming Manual page 235

Port
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Maintenance Console Location
3.27 [1-1] Slot—Port Property - CSI/F Port (KX-TDE series only)
Programming Manual References
None
Feature Manual References
None
Status
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The Cell Station (CS) is in service.
OUS: The CS is out of service.
Fault: The port is not communicating with the CS.
Maintenance Console Location
3.27 [1-1] Slot—Port Property - CSI/F Port (KX-TDE series only)
Programming Manual References
3.28 [1-1] Slot—Port Property - CSI/F Port—Connection Command (KX-TDE series only)
Feature Manual References
None
CS Name
Specifies the name of the CSIF port.
Document Version 2011-10
3.27 [1-1] Slot—Port Property - CSI/F Port (KX-TDE series only)
PC Programming Manual 235