Panasonic KX-NCP500 Programming Manual page 447

Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
4.12 [2-7-1] Class of Service—COS Settings
Programming Manual References
None
Feature Manual References
3.1.22 COS (Class of Service)
Group Forward Set
Enables setting call forwarding for calls to an incoming call distribution group.
Default
Enable-Group
Value Range
Disable: An extension cannot set call forwarding for any group.
Enable-All: An extension can set call forwarding for all groups.
Enable-Group: An extension can only set call forwarding for the group to which the extension belongs.
Maintenance Console Location
4.12 [2-7-1] Class of Service—COS Settings
Programming Manual References
5.13 [3-5-1] Incoming Call Distribution Group—Group Settings—Member List
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
6.10 [4-2-1] Portable Station—Extension Settings—Main—
Feature Manual References
6.1.6 FWD (Call Forwarding)
Programming Mode Level
Specifies the level of authorization for performing PT programming.
Default
COS No.1-63: PROG Only
COS No.64: PROG **/*#
Document Version 2011-10
4.12 [2-7-1] Class of Service—COS Settings
COS
COS
PC Programming Manual 447