3-6] Extension Hunting Group - Panasonic KX-NCP500 Programming Manual

5.16 [3-6] Extension Hunting Group

If an extension within an idle extension hunting group is called when it is busy or in DND mode, the call can
be redirected to another extension in the same hunting group, according to a preprogrammed hunting type. If
there is no idle extension in the group, the call can then be redirected to the overflow destination, which can
be different depending on the time mode (day/lunch/break/night). A maximum of 64 (with the KX-NCP500/
KX-NCP1000/KX-TDE100/KX-TDE200) or 128 (with the KX-TDE600) hunting groups can be programmed,
each containing up to 16 extensions.
To assign members to the group, click Member List. To assign extensions as overflow destinations easily,
click Destination Setting (see 2.1.6 Extension Number Setting).
Hunting Group Name
Specifies the name of the hunting group.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
5.16 [3-6] Extension Hunting Group
Programming Manual References
None
Feature Manual References
9.1.9 Idle Extension Hunting
Hunting Type
Specifies the hunting type for the hunting group.
Default
Circular
Value Range
Circular: Circulates until the call is answered or overflowed
Terminated: Terminates at the last extension
Maintenance Console Location
5.16 [3-6] Extension Hunting Group
Programming Manual References
None
Document Version 2011-10
5.16 [3-6] Extension Hunting Group
PC Programming Manual 561