Panasonic KX-NCP500 Programming Manual page 739

Programming Manual References
4.12 [2-7-1] Class of Service—COS Settings—TRS
Section 9 [7] TRS
Feature Manual References
17.1.6 TRS (Toll Restriction)
4.1.5 Dial Tone Transfer
Parameter Selection (for Time Service - Automatic/Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to Automatic.
Default
1
Value Range
For KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200:
1–8
For KX-TDE600:
1–32
Maintenance Console Location
6.18 [4-3] DSS Console
Programming Manual References
4.6 [2-4] Week Table
Feature Manual References
17.1.5 Time Service
Parameter Selection (for SDN)
Specifies the delayed ringing setting for calls arriving at an SDN button.
Default
Immediate
Value Range
Immediate, 1 Ring, 2 Rings, 3 Rings, 4 Rings, 5 Rings, 6 Rings, No Ring
Maintenance Console Location
6.18 [4-3] DSS Console
Programming Manual References
None
Document Version 2011-10
6.18 [4-3] DSS Console
PC Programming Manual 739