Card Status - Panasonic KX-NCP500 Programming Manual

Area
PBX Region Code
6.
Main Screen
Displays the screens selected from 4. System Menu above.
For details, see Section 3 [1] Configuration to Section 13 [11] Maintenance.
Standard Buttons and Elements
There are several standard buttons that are displayed on many screens within the Maintenance Console.
The standard buttons are as follows:
Button
OK
Cancel
Close
Apply
Refresh
Help
In addition, many screens within the software display a small open folder icon (
items. Clicking this icon will collapse part of the list, allowing other items to be displayed. The icon will change
to a closed folder (
Clicking the closed folder icon will expand the list again.

2.1.4 Card Status

Certain tools, utilities and settings require that the target card be set to out-of-service (OUS) or in-service (INS)
status before the operation is carried out. Where required, this is noted in the description of each item. Card
status changes can only be performed when the software is in Interactive mode (see 2.1.1 Starting
Maintenance Console and Software Modes).
•
"In service" means that the card is installed correctly in the PBX, and is capable of being used normally.
•
"Out of service" means that the card is installed correctly in the PBX, but has been temporarily removed
from use. This allows settings to be modified or software to be upgraded.
•
"Fault" means that the card is not installed in the PBX correctly, or is not functioning correctly. For more
information, see the Installation Manual.
For details about how to change the status of a card, see To change the status (INS/OUS) of a card
(Interactive mode only) on screen 3.1 [1-1] Slot.
Document Version 2011-10
Values
Regionxxx-xxx
Function
Implements changes and closes the current screen.
Abandons changes and returns to the previous screen.
Keeps any changes implemented, and closes the current screen.
Implements changes and remains on the same screen.
Implements changes, updates displayed data, and remains on the
current screen.
Displays the relevant help topic for the current screen.
).
Description
Displays the region code assigned to the PBX and
Maintenance Console.
The first 3 digits represent the region code
assigned to the PBX, and the last 3 digits
represent the region code assigned to the
Maintenance Console.
2.1.4 Card Status
) beside lists of setting
PC Programming Manual 29