Panasonic KX-NCP500 Programming Manual page 187

SIP Location Hold Time Min.
Specifies the minimum length of time that the PBX holds information on the location of SIP Extensions.
To change the value displayed here, click Common Settings and set the desired value.
Default
300 s
Value Range
10–3600 s
Maintenance Console Location
3.17 [1-1] Slot—Card Property - Virtual SIP Extension
Programming Manual References
None
Feature Manual References
16.1.2 SIP (Session Initiation Protocol) Extension
SIP Location Hold Time Interval
Specifies the interval time that the PBX waits before starting to hold information on location of SIP Extensions.
To change the value displayed here, click Common Settings and set the desired value.
Default
1 s
Value Range
1–10 s
Maintenance Console Location
3.17 [1-1] Slot—Card Property - Virtual SIP Extension
Programming Manual References
None
Feature Manual References
16.1.2 SIP (Session Initiation Protocol) Extension
SIP Session Timer Min.
Specifies the minimum length of time that the PBX waits before disconnecting SIP sessions when no
communication is detected.
To change the value displayed here, click Common Settings and set the desired value.
Document Version 2011-10
3.17 [1-1] Slot—Card Property - Virtual SIP Extension
PC Programming Manual 187