1-1] Slot-Port Property - Ip-Gw Port-Connection Command (Kx-Tde Series Only) - Panasonic KX-NCP500 Programming Manual

3.40 [1-1] Slot—Port Property - IP-GW Port—
Connection Command (KX-TDE series only)
Commands for the IP-GW ports can be programmed.
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
3.40 [1-1] Slot—Port Property - IP-GW Port—Connection Command (KX-TDE series only)
Programming Manual References
3.39 [1-1] Slot—Port Property - IP-GW Port (KX-TDE series only)
Feature Manual References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the purpose of
repair.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
3.40 [1-1] Slot—Port Property - IP-GW Port—Connection Command (KX-TDE series only)
Programming Manual References
3.39 [1-1] Slot—Port Property - IP-GW Port (KX-TDE series only)
Feature Manual References
None
Document Version 2011-10
3.40 [1-1] Slot—Port Property - IP-GW Port—Connection Command (KX-TDE series only)
PC Programming Manual 323