Co Line Access Number + Telephone Number; Cli Destination - Panasonic KX-NCP500 Programming Manual

Programming Manual References
None
Feature Manual References
16.1.8 Speed Dialing, System

CO Line Access Number + Telephone Number

Specifies the telephone number (including the CO Line Access number) or feature number assigned to the
System Speed Dialing number.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
8.1 [6-1] System Speed Dial
Programming Manual References
None
Feature Manual References
16.1.8 Speed Dialing, System

CLI Destination

Specifies the CLI destination (extension) to which incoming calls from the programmed telephone number are
routed. If a Caller ID Modification Table is being used, the modified number must match the telephone number
above (CO Line Access Number + Telephone Number) in order for the call to be routed correctly.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
8.1 [6-1] System Speed Dial
Programming Manual References
12.2 [10-2] DIL Table & Port Settings—CLI for DIL—
12.3 [10-3] DID Table—
Document Version 2011-10
CLI Ring for DID—Day, Lunch, Break, Night
CLI Ring for DIL—Day, Lunch, Break, Night
8.1 [6-1] System Speed Dial
PC Programming Manual 789