Panasonic KX-NCP500 Programming Manual page 293

Value Range
CO: For connecting to public network
Extension: For connecting to extension
QSIG-Slave: For connecting to private network (slave port)
QSIG-Master: For connecting to private network (master port)
Maintenance Console Location
3.33 [1-1] Slot—Port Property - PRI Port
Programming Manual References
None
Feature Manual References
None
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
3.33 [1-1] Slot—Port Property - PRI Port
Programming Manual References
None
Feature Manual References
None
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911
Specifies whether each ISDN or QSIG supplementary service is used.
The available services depend on the setting of
When using the Centralized VM feature, set CF (Rerouting) to "No".
Document Version 2011-10
3.33 [1-1] Slot—Port Property - PRI Port
Port Type on this screen.
PC Programming Manual 293