Panasonic KX-NCP500 Programming Manual page 49

PGMPR, DBSYS/DMSYS/DGSYS and LIC files. Use the Activation Key button (see 3.3 [1-1] Slot—Activation
Key) for other LIC files, and the SD Card File View and Load utility (see 2.6.4 Utility—SD Card File View
and Load) for all other files.
The PBX examines the header information of a file to determine 2 things: whether the file contains supported
data, and which system component the file applies to.
Only files whose header information matches that of a system file supported by the PBX can be transferred.
Attempting to transfer any other type of file results in an error message.
The names of all files that can be stored on the SD memory card are as follows:
Main Program
KX-NCP500/KX-NCP1000
Name on SD Memory Card
PBMPR
PBMPR_S
*1 PBMPR-file-format data that is transferred to the PBX from the PC is saved as "PBMPR_S".
KX-TDE100/KX-TDE200
Name on SD Memory Card
PMMPR
PMMPR_S
PMMPR-file-format data that is transferred to the PBX from the PC is saved as "PMMPR_S".
*1
KX-TDE600
Name on SD Memory Card
PGMPR
PGMPR_S
*1 PGMPR-file-format data that is transferred to the PBX from the PC is saved as "PGMPR_S".
LPR Program
Name on SD Memory Card
PCSINF
PDHLC
PSLC
PCSLC
PEESLC
PT1
Document Version 2011-10
Corresponding Card
IPCMPR
IPCMPR
*1
Corresponding Card
IPCMPR
IPCMPR
*1
Corresponding Card
IPCEMPR
IPCEMPR
*1
Corresponding Card
CSIF
DHLC8/DLC8/DLC16
SLC8/SLC16
CSLC16
MCSLC16, MCSLC24
T1
2.6.2 Utility—File Transfer PC to PBX (SD Card)
PC Programming Manual 49