Utility-File Transfer Pbx (Sd Card) To Pc - Panasonic KX-NCP500 Programming Manual

Name on SD Memory Card
DGIPRI23
DGIIPEXT
DGIVIPGW
DGIVSPGW
DGIVIPEX
DGIVSPEX
To transfer files to the SD memory card
1.
From the Utility menu, select File Transfer PC to PBX (SD Card).
The dialog box will be displayed.
2.
Select the file to upload.
A window showing the upload progress will be displayed.
While transferring files to the SD memory card, the PBX automatically renames them according to the
header information.
A message will be displayed when the transfer is complete.
3.
Click OK.
2.6.3 Utility—File Transfer PBX (SD Card) to PC
Copies system data files from the SD memory card installed in the PBX to the connected PC.
This option is only available at Installer level.
The files that can be downloaded from the SD memory card are as follows:
File Name
DBSYS (KX-NCP500/KX-NCP1000)
DMSYS (KX-TDE100/KX-TDE200)
DGSYS (KX-TDE600)
$SYSERR
$SYSERR1–$SYSERR9
LIC00–LIC99
Downloading the DBSYS/DMSYS/DGSYS system data file allows you to make a backup of the configuration
of the PBX.
The error data files are snapshots of the configuration of the PBX taken automatically when a major error
causes a system reset. They can be analyzed by your dealer to identify the source of a problem. If there is
only one error data file, its name will be $SYSERR. If there is more than one file, the files will be numbered in
chronological order, up to a maximum of 9 files.
To transfer files to the PC
1.
From the Utility menu, select File Transfer PBX (SD Card) to PC.
2.
Select the file to download from the list of files on the SD memory card.
Only the files listed in the table above can be downloaded. Selecting any other file will cause an error
message to be displayed.
Document Version 2011-10
2.6.3 Utility—File Transfer PBX (SD Card) to PC
Corresponding Card
PRI23
IP-EXT16
V-IPGW16
V-SIPGW16
V-IPEXT32
V-SIPEXT32
File Type
System Data
Error Data
Activation Key
PC Programming Manual 53