Message Waiting Set / Cancel / Call Back - Panasonic KX-NCP500 Programming Manual

4.9 [2-6-1] Numbering Plan—Main
Switch CLIP of CO Line / Extension
Specifies the feature number used to send either the CLIP number of the CO line in use (subscriber's number)
or the extension to the network.
Default
*7*2
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
3.33 [1-1] Slot—Port Property - PRI Port—CO Setting—
6.1 [4-1-1] Wired Extension—Extension Settings—ISDN CLIP—
6.10 [4-2-1] Portable Station—Extension Settings—ISDN CLIP—
Feature Manual References
3.1.15 CLIP (Calling Line Identification Presentation)
MCID
Specifies the feature number used to ask the telephone company to trace a malicious call. This feature can
be used during a call or while hearing a reorder tone after the caller hangs up.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Feature Manual References
None

Message Waiting Set / Cancel / Call Back

Specifies the feature number used to set or cancel Message Waiting, or call back the caller.
414 PC Programming Manual
Subscriber Number
CLIP ID
CLIP ID
Document Version 2011-10