Panasonic KX-NCP500 Programming Manual page 143

Feature Manual References
None
FAX Detection Ability
Enables the use of the FAX Detection Ability feature. Since fax signals using a codec other than G.711 cannot
be received accurately at the destination, this feature automatically switches the codec to G.711 to enable
end-to-end fax signal relay over the network.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway—Incoming Call—
Feature Manual References
None
DTMF
Specifies the type of DTMF tone to be sent out.
Default
Outband (H.245)
Value Range
Inband, Outband (RFC2833), Outband (H.245)
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
None
Feature Manual References
None
Document Version 2011-10
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Voice Codec Priority 1st
PC Programming Manual 143