Panasonic KX-NCP500 Programming Manual page 933

Feature Manual References
4.1.5 Dial Tone Transfer
DHCP
•
3.4 [1-1] Slot—Card Property - IPCMPR (for KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200)/
IPCEMPR (for KX-TDE600)—
Feature Manual References
4.1.2 DHCP (Dynamic Host Configuration Protocol) Assignment
DID (Direct Inward Dialing)
•
4.5 [2-3] Timers & Counters—Miscellaneous—
•
12.2 [10-2] DIL Table & Port Settings—DID/TIE
–
Distribution Method
–
DID/TIE—Remove Digit
–
DID/TIE—Additional Dial
•
12.3 [10-3] DID Table
Feature Manual References
4.1.6 DID (Direct Inward Dialing)
DIL (Direct In Line)
•
12.2 [10-2] DIL Table & Port Settings—DIL
–
DIL Destination—Day, Lunch, Break, Night
–
Tenant Number
–
VM Trunk Group No.
Feature Manual References
4.1.7 DIL (Direct In Line)
DISA (Direct Inward System Access)
•
4.5 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf
–
DISA—Delayed Answer Timer
–
DISA—Mute & OGM Start Timer after answering
–
DISA—No Dial Intercept Timer
–
DISA—2nd Dial Timer for AA
–
DISA—Intercept Timer—Day, Lunch, Break, Night
–
DISA—Disconnect Timer after Intercept
–
DISA—CO-to-CO Call Prolong Counter
–
DISA—CO-to-CO Call Prolong Time
–
DISA—Progress Tone Continuation Time before Recording Message
–
DISA—Reorder Tone Duration
•
4.5 [2-3] Timers & Counters—Miscellaneous—
Document Version 2011-10
DHCP Client
Incoming Call Inter-digit Timer—DID
Extension PIN—Lock Counter
14.2 Feature Programming References
PC Programming Manual 933