Panasonic KX-NCP500 Programming Manual page 746

6.18 [4-3] DSS Console
Programming Manual References
None
Feature Manual References
None
Dial (for One-touch)
Specifies the number to be dialed. The PBX can have a maximum of 2000 (with the KX-NCP500/
KX-NCP1000/KX-TDE100/KX-TDE200) or 5000 (with the KX-TDE600) One-touch Dialing buttons for
extensions and DSS Consoles.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
6.18 [4-3] DSS Console
Programming Manual References
None
Feature Manual References
12.1.4 One-touch Dialing
Dial (for NDSS)
Specifies the network extension number of the extension to be accessed using Network Direct Station
Selection.
Note that only extension numbers that have been previously registered in 11.4 [9-4] NDSS Key Table can be
specified here.
Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
6.18 [4-3] DSS Console
Programming Manual References
11.4 [9-4] NDSS Key Table
746 PC Programming Manual Document Version 2011-10