Cli For Dil - Panasonic KX-NCP500 Programming Manual

VM Trunk Group No.
Specifies the number of the VM trunk group sent to the VPS when the DIL destination is the floating extension
number of a VM (DPT) Group.
The VM trunk group number is used to allow the VPS to send the applicable greeting message to the caller.
Default
1
Value Range
1–48
Maintenance Console Location
12.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Manual References
4.1.7 DIL (Direct In Line)
19.1.4 Voice Mail DPT (Digital) Integration

CLI for DIL

When CLI distribution is enabled for a CO line to which DIL distribution is set, incoming CO line calls will be
distributed to the CLI destinations (instead of the DIL destinations) if the caller's identification number is found
in the System Speed Dialing Table.
CLI distribution can be enabled or disabled for each time mode (day/lunch/break/night) on a CO line basis.
Shelf
Indicates the shelf type and/or position (reference only).
Default
Current shelf type/number
Value Range
For KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200:
Physical, Virtual
For KX-TDE600:
Shelf number, Virtual
Maintenance Console Location
12.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Document Version 2011-10
12.2 [10-2] DIL Table & Port Settings
PC Programming Manual 845