Kx-Tde100/Kx-Tde200 Pmmpr Software File Version 4.1Xxx - Panasonic KX-NCP500 Programming Manual

•
3.5 [1-1] Slot—OPB3 Card Property
•
3.11 [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings
•
3.12 [1-1] Slot—Shelf Property - Virtual IP Gateway—DN2IP
•
3.14 [1-1] Slot—Card Property - Virtual IP Extension
•
4.18 [2-9] System Options—Option 4
→
Send CLIP of CO Caller—when call is transferred to CO (CLIP of Held Party)
→
Send CLIP of CO Caller—when call is forwarded to CO
•
6.1 [4-1-1] Wired Extension—Extension Settings
•
6.3 [4-1-2] Wired Extension—FWD/DND
•
6.5 [4-1-4] Wired Extension—Flexible Button
•
6.10 [4-2-1] Portable Station—Extension Settings
•
6.12 [4-2-2] Portable Station—FWD/DND
•
6.13 [4-2-3] Portable Station—Flexible Button
•
6.18 [4-3] DSS Console
•
8.6 [6-6] Tenant—
14.1.9 KX-TDE100/KX-TDE200 PMMPR Software File Version
4.1xxx
New Contents
•
4.12 [2-7-1] Class of Service—COS Settings—Assistant—
•
4.12 [2-7-1] Class of Service—COS Settings
→
CA
→
Miscellaneous
•
4.18 [2-9] System Options
→
Option 2—
→
Option 4—
→
Option 5—
→
Option 5—
→
Option 6 (CTI)—
•
5.19 [3-7-2] VM(DPT) Group—Unit Settings—Centralized VM Unit Setting
•
5.26 [3-10] Conference Group
Document Version 2011-10

14.1.9 KX-TDE100/KX-TDE200 PMMPR Software File Version 4.1xxx

Music On Hold
CO - CO Call Limitation—After Conference
Send CLIP of Extension Caller—when call is forwarded to CO
ISDN Option—Calling Party Name Presentation to PRI23
ISDN Option—Calling Party Name Sending Format
CTI Hold—Forced Idle when Hold by PDN/SDN Key
Automatic Answer (Caller)
PC Programming Manual 915