3-1-4] Dialing Plan-Auto Assign - Panasonic KX-NCP500 Programming Manual

5.5 [3-1-4] Dialing Plan—Auto Assign
It is possible to assign a set of leading numbers automatically.
Select Auto Assigning Table
Selects the set of preset leading number values to assign to the active dialing plan table. When Type D is
selected, you will be prompted to enter a 3-digit area code, and 7 "X"s, in cells 1 through 47 of the dialing plan
table.
Default
Type A
Value Range
Type A: 1:N11, 2:NXX XXXX, 3:1NXX NXX XXXX, 4-50: Not stored
Type B: 1:N11, 2:NNX XXXX, 3:1NPX NXX XXXX, 4-50: Not stored
Type C: 1:N11, 2:NXX XXXX, 3:1NNX XXXX, 4:1NPX NXX XXXX, 5-50: Not stored
Type D: 1-47: Not stored, 48:N11, 49:NXX XXXX, 50:1NXX NXX XXXX
Type E: 1:N11, 2:NXX NXX XXXX, 3:1NXX NXX XXXX, 4-50: Not stored
Maintenance Console Location
5.5 [3-1-4] Dialing Plan—Auto Assign
Programming Manual References
5.4 [3-1-4] Dialing Plan
Feature Manual References
None
Document Version 2011-10
5.5 [3-1-4] Dialing Plan—Auto Assign
PC Programming Manual 523