Panasonic KX-NCP500 Programming Manual page 452

4.12 [2-7-1] Class of Service—COS Settings
External Relay Access
Enables access to external relays.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
4.12 [2-7-1] Class of Service—COS Settings
Programming Manual References
7.6 [5-4] External Relay
Feature Manual References
5.1.8 External Relay
Accept the Call from DISA
Enables reception of calls from DISA.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
4.12 [2-7-1] Class of Service—COS Settings
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
6.10 [4-2-1] Portable Station—Extension Settings—Main—
7.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
4.1.8 DISA (Direct Inward System Access)
Remote Operation by Other Extension
Allows the Walking COS feature to be used from a remote location (inside the PBX, or outside the PBX using
DISA).
Default
Allow
452 PC Programming Manual
COS
COS
Document Version 2011-10