Panasonic KX-NCP500 Programming Manual page 311

Maintenance Console Location
3.36 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
Feature Manual References
17.1.1 T1 Line Service
Trunk Property
Selects the CO line property of the TIE channel.
Default
Public
Value Range
Public: Use the DIL/DID method to distribute incoming CO line calls.
Private: Use the TIE line service between two or more PBXs.
Maintenance Console Location
3.36 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
Feature Manual References
9.1.10 INCOMING CALL FEATURES
9.1.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
13.1.15 PRIVATE NETWORK FEATURES
CPC Signal Detection (DID)—Outgoing, Incoming
Specifies the length of time required by the PBX to detect a CPC signal on outgoing or incoming CO line calls
before disconnecting the line. When None is selected here, the line will not be disconnected when a CPC
signal is not detected.
This setting is only available when Channel Type on this screen is set to DID.
Default
160 ms
Value Range
None, 80 ´ n (n=2–75) ms
Maintenance Console Location
3.36 [1-1] Slot—Port Property - T1 Port
Document Version 2011-10
3.36 [1-1] Slot—Port Property - T1 Port
PC Programming Manual 311