Panasonic KX-NCP500 Programming Manual page 246

3.29 [1-1] Slot—Card Property - LCO type
Caller ID—Caller ID (FSK) END Detection
Selects the method used to detect the end of Caller ID information.
Default
Length + Timer
Value Range
Length + Timer, Timer
Maintenance Console Location
3.29 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Manual References
3.1.3 Caller ID
Caller ID—Caller ID (FSK) Header Examination
Enables the PBX to check the header of received Caller ID information. To enable this setting,
Caller ID Signaling on this screen should be set to FSK.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
3.29 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Manual References
3.1.3 Caller ID
Caller ID—Caller ID (FSK) Detection Start Timer
Specifies the length of time that the PBX waits before attempting to detect Caller ID information, after receiving
a call. To enable this setting,
Default
80 ms
246 PC Programming Manual
Caller ID—Caller ID Signaling on this screen should be set to FSK.
Caller ID—
Document Version 2011-10