Cti Hold—Forced Idle When Hold By Pdn/Sdn Key; Incoming Call Log—Busy / Intercept (When Called Party Is Busy) - Panasonic KX-NCP500 Programming Manual

4.18 [2-9] System Options
CTI Make Call—SLT Ring
Specifies whether to ring an SLT when a call is made from CTI, instead of the SLT.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Manual References
None
CTI Hold—Forced Idle when Hold by PDN/SDN Key
Selects whether to force an extension (e.g., KX-NT400) to become idle while having a call held on a PDN/SDN
button.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Manual References
13.1.7 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension
Option 7
Incoming Call Log—Busy / Intercept (when Called Party is Busy)
Specifies whether the following types of calls are recorded in the incoming call log of the original destination.
•
Calls received when the extension is busy.
•
Calls rerouted via the Intercept Routing—Busy feature.
If this setting is enabled, calls are recorded as "Not Answered".
494 PC Programming Manual Document Version 2011-10