To perform a card test
1.
From the Utility menu, select Diagnosis.
2.
Click on the Status cell of the card to be tested, and set it to "OUS".
3.
Click on the cell showing the card type.
A new window will be displayed.
4.
Select the Card Test option.
A new window will be displayed.
5.
Click Test to perform the test(s).
The error report will be displayed. When all tests are completed, the words "Test End!" will be shown on
the last line of the output.
6.
Select an option:
•
Click Capture if you want to save the displayed information.
1.
Enter a file name, or select a file to overwrite.
2.
Click Save.
•
Click Cancel to return to the Diagnosis screen.
Pair Port Test (KX-TDE series only)
Tests the combination of an extension port and CO line port to ensure that communication with the CO line
port can be carried out successfully.
The pair port test can be carried out using one LCOT or ELCOT card and one DHLC, SLC8, SLC16,
MSLC16, ESLC16, EMSLC16, CSLC16, or ECSLC24 card.
Note
With the KX-TDE600, the pair of cards to be used for the pair port tests must be installed within the same
shelf.
The tests that are performed are as follows:
Line current OFF (Ext->CO)
Line current ON (Ext->CO)
Off hook detection (CO->Ext)
DTMF detection (CO->Ext)
DP detection (CO->Ext)
BELL detection (Ext->CO)
Speech path (Ext->CO)
Speech path (CO->Ext)
To perform a pair port test
1.
From the Utility menu, select Diagnosis.
2.
Click on the Status cell of the extension card to be tested, and set it to "OUS".
3.
Click on the cell showing the card type.
A new window will be displayed.
Document Version 2011-10
Line current from extension to CO line turns off.
Line current from extension to CO line turns on.
Off-hook generation/detection from CO line to
extension
DTMF generation/detection from CO line to extension
DP generation/detection from CO line to extension
BELL generation/detection from extension to CO line
Speech path from extension to CO line
Speech path from CO line to extension
2.6.1 Utility—Diagnosis
PC Programming Manual
47