Panasonic KX-NCP500 Programming Manual page 309

Default
Current channel number
Value Range
Channel number
Maintenance Console Location
3.36 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
Feature Manual References
None
Connection
Indicates the channel status (reference only).
This column offers two ways to open the screen to select the channel command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The channel is in service.
OUS: The channel is out of service.
Fault: The channel is not communicating with the network.
Maintenance Console Location
3.36 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
Feature Manual References
None
Subscriber Number
Specifies the number used as the CLIP number.
Default
Not stored.
Document Version 2011-10
3.36 [1-1] Slot—Port Property - T1 Port
PC Programming Manual 309