8-7] Authorization Code For Trg - Panasonic KX-NCP500 Programming Manual

10.8 [8-7] Authorization Code for TRG

10.8 [8-7] Authorization Code for TRG
An Authorization code can be specified for each trunk group. The Authorization codes entered here can be
added to user-dialed numbers by adding "G" to the
10.6 [8-5] Carrier.
8 trunk groups are displayed on the screen at a time. To display other groups, click the applicable tab.
Authorization Code for Trunk Group—TRG 01–TRG 64 (KX-NCP500/
KX-NCP1000/KX-TDE100/KX-TDE200), or TRG 01–TRG 96 (KX-TDE600)
Specifies the Authorization code of each carrier for each trunk group.
Default
Not stored.
Value Range
Max. 10 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.8 [8-7] Authorization Code for TRG
Programming Manual References
10.6 [8-5] Carrier—Carrier—
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
822 PC Programming Manual
Modify Command specified on the Carrier tab of screen
Modify Command
Document Version 2011-10