Panasonic KX-NCP500 Programming Manual page 314

3.36 [1-1] Slot—Port Property - T1 Port
Default
Wink
Value Range
Immediate: Sends the dialed digits to the CO line when the First Dial Timer expires.
Wink: Sends the dialed digits to the CO line when the wink signal is received.
Maintenance Console Location
3.36 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
Feature Manual References
None
Sending Caller ID to TIE
Specifies whether Caller ID information is sent when the channel type is TIE.
Default
No
Value Range
Yes, No
Maintenance Console Location
3.36 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
Feature Manual References
None
Receiving Caller ID from TIE
Specifies whether Caller ID information is received when the channel type is TIE.
Default
Yes
Value Range
Yes, No
314 PC Programming Manual Document Version 2011-10