Utility-Error Log - Panasonic KX-NCP500 Programming Manual

2.6.8 Utility—Error Log
•
When transferring to or from the built-in ESVM block on the MPR card, the ESVM block must be set
to OUS status.
To transfer OGMs to the PC
1.
From the Utility menu, select Message File Transfer PBX to PC.
2.
From the upper drop-down list, select the target MSG/ESVM card/block.
3.
From the lower drop-down list, select the messages to transfer.
•
To transfer a certain message, select the number of that message.
•
To transfer all messages at once, select "ALL".
The Save dialog box will be displayed.
4.
Enter a file name.
5.
Click Save.
6.
Click OK.
When you choose to transfer all messages, each message is saved as an individual file, with a number
appended to the file name corresponding to that message's location on the MSG/ESVM card/block.
When complete, the display will return to the main screen.
2.6.8 Utility—Error Log
Collects and displays system error information.
Whenever there is a system failure, the PBX stores the error code generated. The connected PC collects all
of these codes, along with other information, and displays an explanatory error message.
The functions of the buttons on this screen are as follows:
Button
Cancel
Capture
Minor
Major
Clear
Log Information
The items displayed on screen are as follows:
Item
Index
Date
Time
Error Code
56 PC Programming Manual
Function
Closes the Error Log screen without saving.
Saves the currently displayed Error Log information as a text file.
Displays minor errors, which affect only a certain part of system
operation.
Displays major errors, which affect operation of the whole system, or
result in system failure.
Erases the stored error log information from both the screen and the
PBX.
Displays probable causes of the errors and their solutions.
Description
The ordinal number assigned to an error record in the current log.
The date of the error detection.
The time of the error detection.
The 3-digit error code assigned by the PBX.
Document Version 2011-10