3.35 [1-1] Slot—Card Property - T1 type
Maintenance Console Location
3.35 [1-1] Slot—Card Property - T1 type
Programming Manual References
None
Feature Manual References
None
Flash—Minimum BREAK Width (OPX)
Specifies the minimum length of the break signal in a flash signal from an SLT connected to an OPX.
Default
200 ms
Value Range
8 ´ n (n=3–63) ms
Maintenance Console Location
3.35 [1-1] Slot—Card Property - T1 type
Programming Manual References
None
Feature Manual References
None
Flash—Flash Width (OPX)
Specifies the maximum length of a flash signal sent from an SLT connected to an OPX that the PBX can
recognize as a hookswitch flash signal.
Default
800 ms
Value Range
8 ´ n (n=3–191) ms
Maintenance Console Location
3.35 [1-1] Slot—Card Property - T1 type
Programming Manual References
None
304
PC Programming Manual
Document Version 2011-10