2-8-3] Ring Tone Patterns-Call From Others - Panasonic KX-NCP500 Programming Manual

4.17 [2-8-3] Ring Tone Patterns—Call from Others
4.17 [2-8-3] Ring Tone Patterns—Call from Others
Different ring tone patterns can be selected for incoming intercom calls and ringing triggered by certain PBX
features (Timed Reminder, Call Back, and Live Call Screening). A maximum of 8 Ring Tone Pattern Tables
can be programmed, and any pattern table can be selected for use by an extension.
For more information on ring tone patterns, see "15.1.2 Ring Tone Pattern Selection" in the Feature Manual.
Extension—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for incoming intercom calls.
Default
Double
Value Range
Single, Double, Triple
Maintenance Console Location
4.17 [2-8-3] Ring Tone Patterns—Call from Others
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Option 1—
6.10 [4-2-1] Portable Station—Extension Settings—Option 1—
Feature Manual References
None
Timed Reminder—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for Timed Reminder alarms.
Default
Triple
Value Range
Single, Double, Triple
Maintenance Console Location
4.17 [2-8-3] Ring Tone Patterns—Call from Others
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Option 1—
6.10 [4-2-1] Portable Station—Extension Settings—Option 1—
Feature Manual References
17.1.4 Timed Reminder
460 PC Programming Manual
Ring Pattern Table
Ring Pattern Table
Ring Pattern Table
Ring Pattern Table
Document Version 2011-10