1-1] Slot-Card Property - Ip Gateway (Kx-Tde Series Only) - Panasonic KX-NCP500 Programming Manual

3.38 [1-1] Slot—Card Property - IP Gateway
(KX-TDE series only)
The properties of the VoIP Gateway card can be specified.
En-bloc Dialing setting
Selects the call dialing mode.
Default
Overlap
Value Range
En-bloc: The PBX sends all of the dialed digits at once after the extension user completes dialing. The PBX
recognizes the end of dialing when (1) # is dialed, if programmed, (2) a preprogrammed telephone number is
dialed, or (3) the inter-digit timer expires.
Overlap: The PBX sends dialed digits one at a time.
Maintenance Console Location
3.38 [1-1] Slot—Card Property - IP Gateway (KX-TDE series only)
Programming Manual References
4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
4.18 [2-9] System Options—Option 2—
5.4 [3-1-4] Dialing Plan
Feature Manual References
13.1.26 Private Network Features—VoIP (Voice over Internet Protocol)
QSIG-CT
Enables a call to be transferred to a destination extension at another PBX in a QSIG network.
Default
Yes
Value Range
Yes, No
Maintenance Console Location
3.38 [1-1] Slot—Card Property - IP Gateway (KX-TDE series only)
Programming Manual References
None
Document Version 2011-10
3.38 [1-1] Slot—Card Property - IP Gateway (KX-TDE series only)
Dial—Extension Inter-digit
End of Dial Plan—[#] as End of Dial for en Bloc mode
PC Programming Manual 319