2-4] Week Table-Time Setting - Panasonic KX-NCP500 Programming Manual

4.7 [2-4] Week Table—Time Setting
The start times of 4 different time blocks can be programmed for each day of the week, for the selected Time
Table, as well as the start and end times of up to 3 break periods.
1. Day/Lunch/Night—Day1 Start, Lunch Start, Day2 Start, Night Start—Setting
Enables the setting of the start time for each time block.
Default
Day 1 Start, Night Start: Enable
Lunch Start, Day 2 Start: Disable
Value Range
Disable, Enable
Maintenance Console Location
4.7 [2-4] Week Table—Time Setting
Programming Manual References
None
Feature Manual References
17.1.3 Tenant Service
17.1.5 Time Service
1. Day/Lunch/Night—Day1 Start, Lunch Start, Day2 Start, Night Start—Hour,
Minute
Specifies the start time for each time block. Times can only be set when
Lunch Start, Day2 Start, Night Start—Setting is set to Enable.
Default
Day1: 9:00
Lunch: 12:00
Day2: 13:00
Night: 17:00
Value Range
00:00–23:59
Maintenance Console Location
4.7 [2-4] Week Table—Time Setting
Programming Manual References
None
Document Version 2011-10
4.7 [2-4] Week Table—Time Setting
1. Day/Lunch/Night—Day1 Start,
PC Programming Manual 393