Panasonic KX-NCP500 Programming Manual page 274

3.33 [1-1] Slot—Port Property - PRI Port
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
3.33 [1-1] Slot—Port Property - PRI Port
Programming Manual References
3.34 [1-1] Slot—Port Property - PRI Port—Connection Command
Feature Manual References
None
Status Message
Specifies whether the Status Message is sent to the network.
Default
No Transmission
Value Range
No Transmission: Status Message is not sent.
When error detection (Mandatory): Send the Status Message when an error (Mandatory) is detected.
When error detection (Option / Mandatory): Send the Status Message when an error (Option or Mandatory) is
detected.
Maintenance Console Location
3.33 [1-1] Slot—Port Property - PRI Port
Programming Manual References
None
Feature Manual References
None
274 PC Programming Manual Document Version 2011-10