Message Waiting Notification-Device - Panasonic KX-TVA50 Feature Manual

Voice processing system
Hide thumbs Also See for KX-TVA50:
Table of Contents

Advertisement

Feature Manual References
2.2.26 Interview Service
2.2.28 Logical Extension (All Calls Transfer to Mailbox)
Subscriber's Manual References
5.5 Message Reception Mode
2.2.32 Message Waiting Notification—Device
Description
Automatically calls a preprogrammed telephone number or beeper number when a subscriber has new
messages. New messages will be automatically played back when the subscriber answers the call. When a
beeper is called, the subscriber must call the VPS and log in to his or her mailbox to listen to the messages.
Notifications can be scheduled. The System Administrator can program 2 different time frames (for example,
9 AM to 12 PM and 8 PM to 10 PM) independently for each day of the week. Message waiting notifications will
be sent on the selected days during the programmed time frames.
Notifications can also be sent "continuously", meaning a notifications will sent whenever a new message is
received, 24 hours a day.
The VPS can prompt callers to enter their telephone numbers when they leave messages, and then send caller
telephone numbers to the subscriber's beeper when sending notification.
Conditions
Notification can be sent for either all messages or for urgent messages only, depending on the "Notification
Type" set by the System Administrator or subscriber. When set to "Only Urgent Messages", notification is
sent (according to the notification schedule, if programmed) only when urgent messages have been left in
the subscriber's mailbox.
A maximum of 3 devices (telephones or beepers) can be programmed by the System Administrator or
subscriber for use with this feature. When the VPS calls a device and the call is not answered, the VPS
will try to call the device again. The number of retires and the delay time between retries can be
programmed by the System Administrator. The lowest numbered device is called first. If the first device
cannot be called, the second (then third) device will be called.
Programming Manual References
2.1.4 Notification Parameters
2.5.4.7 Message Waiting Notification
Subscriber's Manual References
5.8 Message Waiting Notification
Manager's Manual References
3.3 Setting Up Message Waiting Notification
Document Version 3.0 2010/06
2.2.32 Message Waiting Notification—Device
Feature Manual
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tva200

Table of Contents