Table of Contents
Advertisement
2. ROLLER DRIVE MECHANISM
The main motor gear [A] transfers the rotation to the rear hot roller gear [B]
through a series of idle
to the friction of the
due
turned by the rear hot roller gear through an idle gear.
However, when the transport belt unit is not set properly, the release
does not engage the idle gear [F] that drives it; so, the hot roller and the
[E]
exit rollprs [G] do not rotate.
gears as shown above. The pressure roller turns
-
hot roller [C].
The upper exit roller gear
1 Nov.
'87
[D] is
gear
Advertisement
Table of Contents
