Table of Contents
Advertisement
1. OPTICS
EXPOSURE GLASS REMOVAL
1-1
Take off the left scale [A] (2 screws).
Slightly lift up the left edge and slide out the exposure glass [B].
NOTE: a)
Place the exposure glass on a sheet of paper in order not to
scratch the surface.
When re-installing the exposure glass, make sure it is under the
b)
right glass holder [C], and flush with the tabs on the ID sensor
pattern plate[D].
c)
When re-installing the left scale, make sure it is as close to the
,
upper cover as possible (see illustration).
3-1
'
Advertisement
Table of Contents
