Ricoh FT3320 Service Training Manual page 165

5-7 MANUAL FEED SENSOR REPLACEMENT
1. Turn off the main switch.
2. Remove the front and rear manual feed links [A] (1 "E" ring each), and
then remove the manual feed table [B] (1 "E" ring, 1 stud screw).
3. Remove the upper entrance guide [C] (2 screws).
4. Remove the right plate holder [D] (1 screw).
5. Remove the manual feed sensor [E] with the bracket [F] (1 screw, 1 con-
nector).
6. Separate the sensor [E] from the bracket and replace the sensor.
3"37
1 Nov. '87