Table of Contents
Advertisement
7. FEED AND REGISTRATION TIMING
- Skew Correction -
The registration sensor [A], which is
rollers [B], sets the paper feed stop
stays on for 204 milliseconds after the leading
the registration
sensor.
the feed clutch. This delay allows time for the paper to press against the
registration rollers and buckle slightly to correct skew.
The CPU energizes the registration clutch [D] 2.5 seconds after the Start key
pressed (about 470 milliseconds after the leading edge of the paper
is
reaches the registration sensor).
positioned just before the registration
timing. The paper feed solenoid [C]
At the
the
end of
edge of the paper activates
204 ms period, the
CPU turns off
Advertisement
Table of Contents
