Table of Contents
Advertisement
1 Nov. '87
9. Adjust the front
ings differ. The
than 0.2
WA.
NOTE: After adjusting the front side, confirm the rear reading once
10
Position the drum shoe on the center of the shaft (Z).
Press the 10 key "18", press the "Start" key, and adjust the charge
11
9
corona current by turning "VRC" on the CTB power pack [G].
Press the "C/S" key, turn off the main switch, and turn off the DPS101 -5.
12
corona wire height
difference between
3-56
adjusting screw [F] if the two read-
front and rear should not be more
again.
Advertisement
Table of Contents
