Table of Contents
Advertisement
1 NOV. '87
IV. Separation Corona
Position the drum shoe
1
the shoe is aligned with the separation corona wire [B] as shown.
2
Re-install the drum stay [C] (1 screw, 1 knob), and return the T/S corona
unit to its original position.
3
Turn on
DPS101-5
4
Select the ACA 200 ± range on the digital multimeter [D].
5 .
Turn on the main switch, press the 10 key "5", and press the "Start" key.
Note the reading. (Wait 30 seconds for the corona current
6 .
Adjust the AC separation corona current by turning
tion power pack
on the center of the shaft so that the axis of
[A]
(Test Mode) on the main
[E].
PCB.
3-58
t
stabilize.)
O
on the separa-
"VRI"
Advertisement
Table of Contents
