Table of Contents
Advertisement
8. Remove the charge corona unit [A] together with the wire cleaner [B] ( 1
screw).
9. Place a sheet of paper [C] over the T/S corona unit [D].
10. Remove the drum stay [E] (1 screw and 1 knob).
The drum stay knob is reverse threaded.
NOTE:
Remove the drum flange [F], and the cleaning unit [G].
11 .
12 w
Open the exit cover [H].
13.
Remove the fusing cover
from the inside of the copier ( 2 screws).
[1]
1-7
Advertisement
Table of Contents
