1 Nov. '87
5-6 PAPER END AND PAPER LIFT SENSOR REPLACEMENT
1. Turn off the main switch.
2. Open the manual
widest position.
3. Remove the upper
- Paper End Sensor -
4. Remove the paper
5. Separate the sensor [D] from the bracket, and replace the sensor.
- Paper Lift Sensor -
4. Remove the paper lift sensor assembly [E] (1 screw, 1 connector)
5. Separate the sensor [F] from the bracket, and replace the sensor.
feed table and slide the paper guides [A] to their
entrance guide [B] (2 screws).
end sensor assembly [C] (1 screw, 1 connector).
3-36