Table of Contents
Advertisement
6
To remove the trapped developer
hold up the unit at an angle, and
shake the unit.
7
Repeat steps 5. and 6. until all the developer is removed.
8 .
Place the development unit on a level surface and pour in one pack of
FT3300 developer [E] (750 g) while turning the paddle roller knob [F].
9
Put the used developer into a disposal bag, and dispose of it according
to local regulations.
at the ends of the development unit,
alternatively turn the knob and gently
3-11
1 Nov. '87
Advertisement
Table of Contents
