Table of Contents
Advertisement
1 Nov. '87
6. Replace the sensor assembly.
NOTE: a)
When installing the assembly, first feed the two harnesses
through the hole [B] and towards the rear of the machine.
Then
in the hole and rotate to the left (1 and 2).
Install the assembly, making sure the 2 hooks and positioning pin
are correctly fixed.
Take care not to move the drum thermistor out of position by
b)
releasing the thermistor clamp plate during removal and re-instal-
Iation.
the sensor facing downwards [C], insert the assembly
with
3-20
Advertisement
Table of Contents
