Table of Contents
Advertisement
1 Nov. '87
27
NOTE: When inserting
face. +
28. Set the drum stay
cleaner.
29. Remove the paper
release lever until the roller is positioned under the arrow.
To prevent the drum from being damaged, do not raise the transport
unit without setting the drum stay.
30. Re-install the development unit and secure it using the development
retainer plate.
NOTE: When installing the development unit, be sure that the development
unit rail [A] is properly engaged with the unit guide rail on the
copier, but keep it away from the drum surface.
the cleaning unit, keep it away from the drum sur-
and the charge corona unit complete
over the T/S corona unit and return
1"10
with the wire
the transport
Advertisement
Table of Contents
